Shockwafe Support / Articles / Room Calibration Guide

Shockwafe Wireless Room Calibration Guide

Fine-tune Shockwafe Wireless for your listening environment with the Nakamichi Theater Remote App. Choose between Easy setup with preset room configurations or Custom setup for advanced calibration.

💡 Note: Custom room calibration is only available through the Nakamichi Remote App.

Before You Start:
Make sure Shockwafe Wireless is powered on and connected to the Nakamichi Theater Remote App.

In-App Room Calibration Guide

Navigate to Calibration Settings

Open the Nakamichi Theater Remote App and tap the Settings icon on the home screen.
Navigate to Room Calibration.
The Room Calibration feature consists of two modes, Easy Setup and Custom Setup.

1. Easy Setup

Choose from three predefined room size presets. Press Save.

2. Custom Setup

Tip: Use a measuring tape to measure the distance from each component to your listening position.

Tap m/ft to switch between units as needed.
In each tab (Soundbar, Subwoofers, Surrounds), drag the sliders to set your measured distances.
Once done, tap Save in the top right corner.

💡 Tap Reset to Default Values in any tab to restore factory calibration.

Your custom settings are saved and applied for optimal audio performance.