top of page

DRAGON / Device Settings / Sony Blu-ray

Sony Blu-ray

Step-by-Step Instructions for Best Experience (Dragon 11.4.6)

Nakamichi_CES_Full_System_20230327_OUT-min.png

Reference Model: X800M2 (2019)

Select the User Interface below that matches your device:

STEP-BY-STEP GUIDE:​

warning-2.png

Connect Device's HDMI OUT to DRAGON HDMI IN with a HDMI-certified High-Speed 2.1 cable (48Gbps) for high quality video and audio. Recommended HDMI Cable >

​

For Dolby Atmos support, ensure your Bluray player is certified to support Dolby Digital Plus format at minimum (Dolby TrueHD format for lossless Dolby Atmos audio)

​

For DTS:X support, ensure your Bluray player is certified to support DTS-HD Master Audio format

​

For maximum stability, set YCbCr / RGB (HDMI) to Auto.

Click on the arrow button at the sides of the image to go forward/backward for settings. (Click on image to enlarge)

​

1. Audio Output

Sequence:

  1. Home > Setup

  2. Home > Setup > System Settings

  3. Home > Setup > System Settings > HDMI Audio Output

  4. Home > Setup > System Settings > HDMI Audio Output > Auto

2. Audio Settings

Sequence:

  1. Home > Setup

  2. Home > Setup > Audio Settings

  3. Home > Setup > Audio Settings > Digital Audio Output > Auto

  4. Home > Setup > Audio Settings > BD Secondary Audio > Off (To enable Dolby Atmos audio output)

  5. Home > Setup > Audio Settings > DSD Output Mode > Off

  6. Home > Setup > Audio Settings > DTS NEO:6 > Off

  7. Home > Setup > Audio Settings > 48khz.96khz.192khz PCM > 48khz

  8. Home > Setup > Audio Settings > DSEE HX > Off

  9. Home > Setup > Audio Settings > Audio DRC > Auto

  10. Home > Setup > Audio Settings > Downmix > Surround

warning-2.png

Press the INFO button on DRAGON remote control to verify the audio format received on DRAGON via on-screen display (Dolby / DTS audio for best audio)

bottom of page